image_pdf

In the process to install the TLM 100 inside our aft center water tank (https://www.sailinghotelcatalina.com/water-tank-monitoring-with-maretron-tlm-100/), I dropped a small piece of plastic inside the tank. It’s how I became interested about inspection port.

My setup was based on this blog article:

  • http://goodoldrvs.ning.com/profiles/blogs/installing-inspection-ports-in-water-tank

Knowing I am a huge fan of http://www.goodoldboat.com/, this article was perfect for me!

Right now I have been using the inspection port to check the state of the tank (since the TLM 100 has not been very helpful so far) and also to clean it.

Requirements

  • Beckson 6″ clear screw out deck plate:
    • $22
    • https://www.amazon.com/gp/product/B000Y85OZY/ref=as_li_tl?ie=UTF8&tag=sailinghotelc-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B000Y85OZY&linkId=fa2a5bd162a160a65812e0ddc0072c83
  • Sealant:
    • https://www.westmarine.com/buy/west-marine–marine-silicone-sealant–P004_127_001_005

Step by step

 

 

Leave a Reply

avatar
  Subscribe  
Notify of